WAS SOLDCase 721 CXT wheeled loader with bucket
Joystick controls
Quick hitch
3rd line hydraulics
Weigh load system
Ulrich 10 ton hydraulic winch
Direct from the military with only 2,641 Hours in excellent condition
Machine can also be supplied with forks if required

Specification of the ex military Case 721 CXT wheeled loader

Engine Cummins 6T-830 turbocharged watercooled 171 HP
Gearbox ZF powershift with 4 forward and 3 reverse gears

Operating Weight 160000 kg
Fuel Capacity 53.9 gal 204 L
Hydrauilc System Fluid Capacity 40.5 gal 153.3 L
Engine Oil Fluid Capacity 5.5 gal 20.8 L
Cooling System Fluid Capacity 8.5 gal 32.2 L
Transmission Fluid Capacity 3.2 gal 12.3 L
Front Axle/Diff Fluid Capacity 7 gal 26.5 L
Rear Axle/Diff Fluid Capacity 5.5 gal 20.8 L
Static Tipping Weight 21751 lb 9866 kg
Turning Radius 17.2 ft in 5250 mm
Operating Voltage 24 V
Alternator Supplied Amperage 65 amps
Rear Axle Oscillation 24 degrees
Tire Size 20.5-25 L3


Hydraulic System
Pump Type dual, vane-type tandem
Relief Valve Pressure 2775 psi 132.9 kPa
Pump Flow Capacity 18.6 gal/min 70.4 L/min
Raise Time 5.4 sec
Dump Time 2 sec
Lower Time 4.6 sec

Bucket
Breakout Force 28097 lb 125 kN
Dump Clearance at Max Raise 9.4 ft in 2870 mm
Bucket Width 8.6 ft in 2620 mm
Bucket Capacity - heaped 2 m3


Dimensions
Length with Bucket on Ground 23.9 ft in 7270 mm
Width Over Tires 8.3 ft in 2530 mm
Height to Top of Cab 10.7 ft in 3260 mm
Ground Clearance 1.4 ft in 419 mm
Wheelbase 9.5 ft in 2900 mm
Hinge Pin - Max Height 12.7 ft in 3860 mm
Reach at Max Lift and Dump 3.8 ft in 1170 mm

Hrs_Kms 1,500 - 2,500 hours
Date into Service 2001